andrew smith asked ... 2009 fiesta 1388 cc titainum?    |    Eric asked ... Strimmer fuel line?    |    Frank asked ... Working fine. No cold air?    |    c.m.brown asked ... Replace chuck on aeg power drill sb2e 700r?    |    tom dimmock asked ... How can i mend the lid on russell hobbs elec?    |    Click here to ask your question

how do i safely remove the sump hose?

my washing machine isn't draining water properly. I want to check for blockages in the filter which I think is located in the black sump hose at the back of the washing machine. How do I do this without damaging the washing machine electrics by water running out?
Joannie, October 2009
The "black hose" has no filter. It is a sump hose & it may or may not have a plastic "eco ball" in there depending on which machine you have. The filter is located at the front of the machine (at the bottom). Look for a small trapdoor & open it. You should see 2 things...a small hose with a plug in the end & a filter. The filter unscrews anticlockwise but before you remove it you must drain the remaning water via the drain hose. Have a bucket on hand! Once the water is drained you can safely open the filter (there will be a small amount of water still in there so put a towel underneath). Check inside for foreign objects & remove whatever you find. Of course it is always possible there could be a small item of clothing or similar stuck in the sump hose, but check the filter first before tearing off hoses. That's the easiest way to go. You could also have a faulty pump, they do wear out....often.

Mike, October 2009