Toddy asked ... Pdw5048tms saw?    |    Karen asked ... Royal 480nt cash register?    |    andrew smith asked ... 2009 fiesta 1388 cc titainum?    |    Eric asked ... Strimmer fuel line?    |    Frank asked ... Working fine. No cold air?    |    Click here to ask your question

how do i fit belt in white knight dryer model cl300?

how do i fit belt in white knight dryer model cl300
david, October 2009
hi David remove top then remove screws for back Do not pull at back cover as the motor spindle is attached gently move the drum back away from the door giving enough room to get the new belt around the drum,easier to put the belt on the base of the drum first then pull up around the top. move drum around to check it's not twisted, then lie the dryer on its side remove 4 screws from base cover and pull the belt around the motor its very tight but it does go then replace all screws make sure drum is in the correct position and try. Hope this helps Andy

Andy.D, October 2009
link Click here to see other fixes for White Knight CL300.