Mike asked ... Bosch WTA74200GB Vented Dryer?    |    Stuart G asked ... C3 Front Wiper control problem?    |    Clare S asked ... Repair Electriq dehumidifier?    |    Bob asked ... Charger fault?    |    Terry nelson asked ... How to remove the flexible shaft from a curved shaft ryobi t?    |    Click here to ask your question

hotpoint washer/dryer WD62?

water comes out of dispenser draw when first starting michine. [with powder in]when filling. Draw is clean. what the problem?
stan smith, October 2009
The top of the drawer is lined with little holes above each segment of the soap box. this can only be seen with the soap drawer removed. this is done by pulling the drawer out fully and the pressing the little green tab in the centre of the drawer and then removing. Then check that all the holes are clear. if so make sure the out of the soap box is clear. If the water cannot get into the drum then it will come out the drawer,

Smc Services, October 2009
link Click here to see other fixes for Hotpoint.