Mike asked ... Bosch WTA74200GB Vented Dryer?    |    Stuart G asked ... C3 Front Wiper control problem?    |    Clare S asked ... Repair Electriq dehumidifier?    |    Bob asked ... Charger fault?    |    Terry nelson asked ... How to remove the flexible shaft from a curved shaft ryobi t?    |    Click here to ask your question

my washer dryer indesit widl126 s uk is not working?

the washing machine starts to fill with water and is emptying of water at the same time
conor, October 2009
I HAVE A WIDL126S INDESIT WASHER/DRYER.SOMETIMES THE DRYER DOESN'T DRY PROPERLY.I REMOVED THE CHAMBER WHERE THE AIR IS DRAWN FROM THE DRUM AND HEATED,THIS HAD SOME FLUFF IN IT WHICH I REMOVED.THIS SEEMED TO FIX THE PROBLEM FOR A WHILE.
ITS NOW DOING IT AGAIN ERRATICALLY,THE HEATER HAS AN OHM READING OF 41ohms AND THE FAN IS WORKING OK.
ANY IDEAS?????

paul mcardle, December 2009
If that is the case then you have a problem beyond the scope of the average DIY'er. You need qualified assistance, I would suspect the control module.

Mike, October 2009
no its being pumped out .Hose is at the correct level .

conor, October 2009
Check correct positioning of the drain hose. It explains clearly in your user manual! If it is too low water will fill but run straight out again.

Mike, October 2009
link Click here to see other fixes for Indesit.