This is Gil Stark answering my own question It is a big job. The drum has to be removed completely, along with the motor. The drum has to be split into two, to access replacement of bearing and seal. If your machine is a few years old I would suggest you replace the door seal whilst it is off .I did mine in the garage to be out of the wifes way,as it will take a couple of days if you have not done one before. If you have to move your machine any distance remove the concrete dampers first as they are quite heavy.Don't be put off by my remarks You can do it all the best
Gil.
Gilbert Stark o7814258842, February 2010
