Dryer was showing water full, the drum was still turning but no heat. I emptied the water where the float is which operates the empty water light
The machine worked OK but the water is not going up to the water container. I have cleaned all filters and condenser

Mike P, November 2009

No answer - I have the same problem and the water is just pouring out at the bottom - any suggestions??

Sam, December 2009

you have either a bloked pipe going to the container or the pump is not working! the pump is next to the float. pore in a cup of water into the chamber so the light comes on at the front again the tern it on and listen for the pump to kick in! it should empty the cup of water by itself stait away! if it dousent take out the pump. (making sure its terned off at the maines!). there should be two or three screws on the pump take these out and wash out the pump inside. this shuld make it start terning again. if not. you will requier a new one!

owain, November 2009