GG asked ... Fix food processor motor?    |    T asked ... How do I turn the delay off on Electrolux DX302 dishwasher?    |    Helen asked ... How can I mend my Kenwood Gourmet FP505?    |    Roy Turner asked ... Kohlangaz Gosford HE fire?    |    Peter asked ... How can I mend a Powerwasher PRO PRO1800PWE?    |    Click here to ask your question

Peugeot Jet force cuts out?

Hi I have a peugeot jet force 125 efi 2003. the pro
blem i have is that is runs at idle speed ok but when you rev it it cuts out. You can leave it idleing all day and it is fine, rev it cuts out and you have to wait until it cools down, it is getting fuel and a spark. Can any one hlep
Paul, November 2009
This is a joke, peugoet must no by now the bikes or something withing the bikes are faulty, mine does the same, runs nice-ish then as soon as the temp crops up it doesn't wanna run, replaced; air box,injector,spark plug,exhaust,rectifier,altenator,drive belt and the weights+rollers inside and still doesn't want to run right, does any1 no a good website to go for cheaper parts? I've been using 3 cross and the injector cost me 108 pound you can guess how much the rest cost me, help me?

reece, July 2013
i have a peugeot jetforce 125 efi just had engine re built and new oil an filter an plug new battery and fuel injector an fuel pump and it starts up and it revs to 4 thou rpm then splutters and dount want to drive any idea,s chaps i have had it plugged in on ecu had a few sensors changed an new air box

james bertram, August 2011
I have a peugout, jetforce 125 motor. But the ECU of this is fail. Have you got it? I want to replace for my love motor.
In this, I see some information:
- Philips 325-309-OA
- 04 stroke-PI
- 3250390A-02346005134
- Made in France
How can I find this spare part for replacement.
Thank you

Tuan Nguyen, February 2011
hi i have a 50cc peugeot jet force its hard to start when left over night i have checked the feed to the carb and there isnt any any clues to why thanks alan

alan, October 2010
hi i have a spark but its every were on the spark plug wen u put the the plug in it wont start some one said it could b the ecu unit does any one know

steve, May 2010
somethings going on and it keeps cutting my posts off i'll try again
http://www.peugeotscooterspares.co.uk/spares/partImage.asp?GPN=ZUJ;:;8

neil, February 2010
sorry this is the part
http://www.peugeotscooterspares.co.uk/spares/partImage.asp?GPN=ZUJ

neil, February 2010
It is really easy to replace, just take the tub out from under your seatHere is a free download of the jetforce technical manual to help you.
http://scootercommunity.com.au/files/folders/6402/download.aspx
good luck
Neil

Neil, February 2010
Hi Paul
I had the exact same problem. On my bike it turned out to be the bypass valve. You can get one from here:
http://www.peugeotscooterspares.co.uk/spares/partImage.asp?GPN=ZUJ

Neil, February 2010
Paul,
I have exactly the same problem since ... 5 years! The problem always disapears by themselfs after a while. I figured out some things:
1) mostly it appears when its hot (+23°C) or cold (+-0°C) weather
2) after a while (some hours) without touching anything, everthing returns to normal and the scooter is running fine
3) When the scooter is running fine, you can reproduce the problem by disconnecting the throttle potentiometer. When you reconnect the connector, everything returns to normal.
4) When the problem appears, it is the ignition that is cutted off (the HT coil get no pulse => no spark).

I'v already changed the ECU and the throttle valve unit; it didn't help.

I'm curious about the status of your scooter ...

Geert, February 2010
got peugeto jet force 50 no spark any clues

billy, January 2010
Hi all. did you connect a Peugeot computer to the jetforce? while back i had a similar problem with mine after changing a faulty ecu. computer gave that the potentiometer was faulty also. replaced the potentiometer and all went well.

Vince, December 2009
hi paul no luck yet maybe look at throttle position sencor on side of throttle body next unless any body else has any ideas have fuel presure at trottle body good spark it did run fine for a few miles a while back but started playing up again thanks russell

russell perks, November 2009
Hi russell, still not fixed, had it running went about 5 miles, it was running very ruff, cut out when got home, now wont start. Have you had any luck? Thanks Steo, have both keys red and black, tried both, still the same problem

Paul, November 2009
HI PAUL IF YOU READ THIS I HAVE THE SAME PROB WITH MY JET FORCE 125 DID YOU FIND OUT WHAT IT WAS IF YOU DID CAN YOU POST THE FIX THANKS

RUSSELL PERKS, November 2009
Check out page 88 on this forum, the 'BIKE WON'T START' post, sounds exactly like your problem which Adam gave a prognosis if you care to research.

Steo, November 2009
link Click here to see other fixes for Peugeot 125.