Mike asked ... Bosch WTA74200GB Vented Dryer?    |    Stuart G asked ... C3 Front Wiper control problem?    |    Clare S asked ... Repair Electriq dehumidifier?    |    Bob asked ... Charger fault?    |    Terry nelson asked ... How to remove the flexible shaft from a curved shaft ryobi t?    |    Click here to ask your question

hav a muccolloch 335. keeps stalling. how do i set timing or is it dirt in ?

my chainsaw was working perfectly then yesterday just kept stalling and had to constantly fiddle with choke to keep it going. how to cure? or is it timing?
chris, November 2009
It is not timing, the symptoms you describe are fuel starvation, check for dirty or stale fuel in the tank, check for blocked fuel filter in tank, remove carb and check filter screen in the pump side of the carb ( cover held with one philips head screw ) richen the L screw on the carb, 1/4 turn anti clockwise.

Husqvarna man, November 2009