How do you change the starter, can't get fly wheel off.

JR, November 2009

May also have a key way or sheer pin, there is a puller for this, you can usually use 2 flat head screw drivers at each side, use prying motion at the base of shaft so not to break the flywhell, and just tap center shaft with a hammer, place a piecr of wood over the shaft first so not to flare out shaft.

Trevor, March 2012

There is a torx 20 screw in the middle of the shaft, need a standard type scredriver that has the torx tip, Not a screwdriver with replacement tips. Once that is removed should come right off.

Trevor, March 2012