REMOVE THE PLUG FROM THE MAINS
Remove the lid, held on by screws on rear of machine
You will see a metal band that secures the seal from the inside of the machine, this is secured by a screw and square nut, undo the screw and release the band.
Open the door, the door seal is secured by either a metal band that is screwed together, or a plastic band that clips together. Once the 2 bands (inner and outer ) are removed the seal will pull off. NOTE when you look at the seal from the front of the machine you will see a notch in the seal in the 7 or 8 o'clock position. The new seal must be fitted with this notch in the same place. Washing up liquid will assist in refitting. The drum has 2 springs that hold it in place from the top, releasing the one to the front of the machine will allow better access to the seal from inside the machine.
Shadwell36, December 2009
