Helen asked ... How can I mend my Kenwood Gourmet FP505?    |    Roy Turner asked ... Kohlangaz Gosford HE fire?    |    Peter asked ... How can I mend a Powerwasher PRO PRO1800PWE?    |    Mike asked ... Bosch WTA74200GB Vented Dryer?    |    Stuart G asked ... C3 Front Wiper control problem?    |    Click here to ask your question

HOTPOINT cdt85 dryer causing rcd cot out?

Our CDT 85 ultima dryer is causing the rcd to trip out. When the rcd is reset the display shows correctly but the rcd trips out after about 5 or 6 seconds of running
Paul, December 2009
You have a blockage in your condensing chamber, causing water to go inside ur dryer and get onto ur thermostats..switch ur appliance off, at the rear of ur dryer u will see a grey tub (condenser chamber), prise this off with a flat screwdriver and u will see a build up of water, at the left bottom corner u shud see a transfer hole which should be clear...now go to the front remove ur condenser, put ur hand inside right to the back...remove any build up of fluff...it will be wet...now leave ur dryer for at least 24 hours, to allow any water that has got onto ur thermostats/heater to dry...sorted...

Billybo, December 2009
link Click here to see other fixes for Hotpoint.