Electrolux EWF1090 Fault "E20" ?

We have a Electrolux EWF1090 7kg machine, approximately 36months old. It works but comes up with an E20 Fault & the cloths come out really hot.

Any Idea what's going on with it?

Tim, December 2009

Just followed the first solution above and removed a car key, hair band, tooth picks, guitar picks, and lint that were blocking the pump. All fixed. Great post. Thanks!!

Appreciative!!, May 2013

Oh and relating to the answer I just left ( do not forget to attach the hose back to the front of washer :) lol

tina, June 2011

WE JUST FIXED OURS YESTERDAY $AVING HUNDREDS OF DOLLARS IN CALL OUT AND REPAIR FEES. ( SMART HUBBY OF MINE) XX
All you have to do is disconnect the power.. lift onto 2 saw horses. Remove the rubber sealed plate at the base( the odd shaped one) and unscrew the drain hose where it meets the front of the washer. :) the coins will drop out (50c yes) we had four in there :(.... Replace bottom panel.. then put back on floor.. switch on and presto FIXED :) Hope this helps some people out there!

Tina, June 2011

Our EWF1090 is ALWAYS doing this. The culprit - 50c coins. They are a disaster. After getting the technician 2 times for $190 each visit I am now thinking the machine HAS to GO! Apparently in China they dont have anything like our 50c coins so dont make drain holes to suit.

washer woman!, December 2009

E20 is a draining issue.check the filter (bottom right).once the filter has been removed shine a torch in to the filter housing and check the impellor rotates freely

ck, December 2009