Thank you for the reply abaout the sukida indicators, i went to DC motor cycles and they could not find the fault? and said they have to strip the bike down as it is something to dow the gears as the indicators work when in N but when changing gears only the front right does not work and the dash board is going mad. would you let them strip the bike down as they are the ones that fited the lights in the first place.

jason, December 2009

Yea water in your airbox being sucked in to carb

dan, February 2011

I have a sukida patriot sk125-5 i got water in my engine onr day when it rained hard. so when my bike was hot it would not start and when it was cold it started up easy. Oh anf it took a few weeks to dry out as i rode two work everyday. And to your light problem ur lucky they havent fried ur wiring loom

dan, October 2010

my exhaust on my sukida 125 sportsman 2 has rotted from the flange on the downpipe, the only replacement downpipe i can find is for a 50cc. Does anyone know if it will fit ?

Paul, February 2010

my exhaust on my sukida 125 sportsman 2 has rotted from the flange on the downpipe, the only replacement downpipe i can find is for a 50cc. Does anyone know if it will fit ?

Paul, February 2010

Um regarding my sukida 125-2. they chaged the spark plug and they said it was fixed. Wrong the bike still does not work right drops to 10mph up a hill and feels like it is jamed in first gear, any ideas?

Jsson, January 2010

No I think you've misunderstood... When the bike is cold.. like at 5am on a cold COLD morning when I have to leave for work its fine, I put the choke on full use the starter and it comes to life... Its only when the engine is hot I have problems. If I warm the bike up and then turn it off I cannot start it for 20mins (seriously) until it COOLs down... Its a weird problem I have and I can't get any definite answer from anyone :(

Scott, December 2009

Well the sukida get cold very quick and needs a lot of warming up first thing in th morning, but thanks for the head up on the garage and striping my bike, i will take to another place thank you and hope you have better luck with you bike. just warm it up first then try.

jason, December 2009

I can't see how the GEARS would make it do that.. Its completely not related. I think you might have a problem with the wiring that connects to the gear indicator... I personally wouldn't let them strip down my engine to fix it.

On a side note, I have the exact same bike as you, its an 08 plate and im having serious problems with starting the bike... It doesn't let to be started if the engine is warm. For example, if I go out and I stop at some shops, turn the engine off and come back 2mins later the bike will refuse to start. Do you have any similar problems with it?

Scott, December 2009