4 hours ago Karen asked ... Royal 480nt cash register?    |    andrew smith asked ... 2009 fiesta 1388 cc titainum?    |    Eric asked ... Strimmer fuel line?    |    Frank asked ... Working fine. No cold air?    |    c.m.brown asked ... Replace chuck on aeg power drill sb2e 700r?    |    Click here to ask your question

how can ifix my becko wma510w?

on the final spin myu machine makes hell of noise bearings seem fine
kieran, December 2009
grip the stainless inner drum at 6 o clock position and try lifting it up and down vertically.any movement= knackered bearings.if the bearings are ok you need to check the concrete counterweights are fastened on tightly (on bottom an top of tub).if they are ok then you need to remove the heater and check 2 things.1 is the heater mounting clamp is still fastened inside the tub and 2 is check for bra wires/objects trapped in the drum.if the heater clamp has come out you can normally tell by looking at the end of the heater and it will have wear/rub marks on it.

ck, December 2009
link Click here to see other fixes for Becko WMA510W.