Have checked ALL fuses - ok, have disconnected and tested wiper motor direct off battery - works fine. Where could the fault be? Switch operation gives clicking from relay under fuseboard in engine compartment but no feed to motor?
My wife's C3 washers did not work. I opened the bonnet and lifted it up; they worked. The feed pipe bends when you close the bonnet and stops the water, the pipe is next to the arm that is used to hold the bonnet up.
GES, January 2011
Fault is possibly inside motor remove plastic wiring connector which is clipped and siliconed and look for earth from connector to motor body a small brass tag and check it is not blackened by overheating. clean both motor body and brass tagand re-assemble and test.
Rusty, December 2010
I have the same problem and did the earth thing and sill no luck what else could be wrong??
reenen, December 2010
earth problem inside motor take a wire from the motor body and fix to earth wire on left hand side of the motor
