i need to tilt the cab on our 98 75e14 horse box. i have spent the day removing the metal work arround the cab, now when i turn on the iginition it's like blackpool illuminations !!. i see that there is a lift ram with two pipes exiting but can't see any catch or button to activate. can anyone tell me where the key parts should be ? is it possible to pull the cab over manually ?

dave, December 2009

try following pipes from cab tilt ram, should be at end.

k, December 2009

http://cgi.ebay.co.uk/NEW-CAB-TILT-PUMP-LEYLAND-DAF-IVECO-BEDFORD-FODEN-ERF_W0QQitemZ290361072205QQcmdZViewItemQQimsxq20091020?IMSfp=TL091020203003r32812

is this an iveco cab tilt valve

dave, December 2009

ive found the location of the missing tilt handle - but cannot find the valve. were should it be mounted, behind the mudgard is the air intake then the air box. further in is the cab damper and something used to be mounted on the back of the cab but only the bracket remains

dave, December 2009

cab tilt handle is behind front grille n/s [or should be]pump is just behind n/s/f wing turn valve with locating lugs on handle and pump to lift cab, make sure nothing in way at front, and as previous post replied OPEN GRILLE.to lower turn valve and pump to lower -pump till resistance is felt.then you need to move gear lever back and forth to lock gear change in position.

k, December 2009

behind the front wing area it is a small container with a hole to put a cab tilt bar into .
REMEMBER TO LIFT THE FRONT GRILL.

lecky, December 2009