Just fitted a veritas alarm panel but cannot find out the way to fit a panic alarm from the manual, any ideas?
Could I just put it in the global tamper circuit or do I have to use a spare zone and reprogramme it to be 24 hour-- if so, how?

David, December 2009

NO- do not include it in the tamper circuit as this will only give an internal alarm.
Use a spare zone and change it to personal attack---enter code
xxxx then press prog then 1 followed by zone number you are going to use then 7 then prog.
The zone chosen should now give an instant alarm when the panic button is pressed .

david MK 2, December 2009