I am looking for the plastic brackets that hold the inside of the corners of the drawer together. I have checked with my hardware stores and they only have metal brackets that are even in length. I need on side to be longer than the other.

Frustrated, January 2010

The trouble with drawer construction is that the front and particularly the sides and the back are very thin - there is not much material to hold a screw securely. Have you considered wooden blocks and glue inside the affected corners? You will need to clamp firmly together while the glue sets - White PVA is probably best on wood but not on plastic.

If you must use metal brackets stretcher plates may work for you - cheap - used for fitting table tops...

http://www.kitchendoorcompany.co.uk/product-images/accessories/fullsize/stretcher-plate-angle-bracket.jpg

Peccavi, January 2010