Does anyone know what the service code EA means on a Greenstar 30cdi system? better still what to do when it appears?
thanks

drallek, January 2010

Thanks; Harry and Mike just done the same thing, boiling water works wonders.

Pete, December 2010

Harry's solution cured my issue twice in 2 days now...

Thanks
Mike

Mike, December 2010

EA is an ignition failure.
If this has happened since the cold weather it is possible the small drain pipe outside from your boiler is blocked with ice.Try clearing with boiling water.This corrected mine,Regards,
Harry Risk

Harry Risk, January 2010

a cut and paste from previous reply -


this is a manual for engineers - this will give a list of things relating to fault codes on the boiler- eg EA etc - to read on these cold winter nights while waiting for your v busy service engineers to come and sort out for u

http://www.google.com/url?q=http://www.worcester-bosch.co.uk/cache/file/1/greenstar-cdi-service-booklet-for-engineers.pdf&ei=n3VES7GNAoWI0wSVjOCRBQ&sa=X&oi=nshc&resnum=1&ct=result&cd=1&ved=0CBUQzgQoAA&usg=AFQjCNEzexaBgftUutv5yXFAZyVlCRsW1A

its quite a good read if i say so myself, if u are going to attempt to use you do so at risk - best put in the hands of your servicing engineer if u have any doubts/concerns

regards

i expect there are other manuals for other models if u google correctly/wisely

eddie

eddie, January 2010

press reset its anything from no gas to ignition fault
check the condensate pipe isn't frozen up

b, January 2010