Hello,

My Zanussi TD62 tumble dryer heats up but doens't want to tumble. Have taken small cover off the back and the lid but couldn't see anything obvious. Yaking main back cover off looks complicated.

Any suggestions?

Cheers

Lee Smith, January 2010

Hi Lee,
Make sure the belt isn't broken to start with, if it's ok then try removing the lid & switch the machine on & give the drum a push with you hand, if the drum starts to turn it will require a capacitor. they can be purchased from this link below.

http://www.candmdomesticappliances.co.uk/product.php/1434/146/capacitor-8uf

check the UF rating because they all very but most tumble dryers use an 8UF. Good luck

www.candmdomesticappliances.co.uk, January 2010

is the belt around the drum and motor shaft?

ck, January 2010