Hi,

I want to replace my standard stock gear knob on my Peugeot 206 1.4 LX (2000). I need to know how to remove it so I can use my new one I've bought.

Any help would be greatly appreciated.

Thanks.

Simon, April 2006

Sorry guys, but is there a bit of brute force and ignorance at play here? I pulled hard as many have suggested, and succeeded in removing the whole gear lever from the top of the gear-box! Forums are helpful some of the time, but not this time!

Rubato, June 2015

Just undo the zip tie undernieth turn the gear knob left then pull up and it will come off

Craig moore, May 2015

if you replace the gear knob and break the white sleeve under neath it can you get another one ??

lomali boxers, February 2015

cut the gaitor zippy cover put gearstick in fourth gear and pull you may have to turn it to the left until you hear a click to snap the white clips then straightforward swap hope this helps

ray, December 2012

I bought a `universal knob which doesn't fit over the white shaft!!! :-( can that be removed as well????

sarah, November 2012

If it's the original knob then you have to remove the gaitor housing (the leather thing around the stick for novices) as the knob extends to under the gaitor and no amount of pulling will remove it without doing this first. It's easy to remove just by lifting from the long edges first and it slips out. The gaitor is secured into the middle of the bottom of the knob by a zippy tie that you have to cut. You can then just pull the whole knob up with a little bit of force but it slips up revealing a white plastic shaft. I just secured the new knob to this as per instructions (just a universal one from the auto shop) then used another zippy tie under the gaitor to secure it so the white shaft didn't show. Looks like new. Anyone can do this. I'm a women. ;)

Ms M, July 2011

with a good olde yank

brad969, June 2011

How on earth do you get it Off cos i have used everything i can think of and it still will not come off!! Ive pulled and pulled at it time and time again isnt there another way? Would apreciate the help

Scottsta, March 2011

some of the gear knobs have to be turned left and you will feel a click and the alignment strips are in the correct position for removal. then pull on gear knob and it will come off, with a bit of force.

Ian, August 2010

i have a 206cc and i want to replace my excisting gear knob how do you do it?

richard, January 2010

you take off the gaitor and just pull it off the gear stick but with a lot of force as the rubber thing that attatches to knob to the stick is really tough to pull off.

chani, April 2009

You just pull it off!! It may not feel like it wants to budge, but keep pulling and it does come off! Don't get too close to it as I did as i smacked myself in the mouth with the gear lever when it did come off!

The new gear knob/gaiter will simply push on.

Rich, April 2006