3 hours ago Karen asked ... Royal 480nt cash register?    |    andrew smith asked ... 2009 fiesta 1388 cc titainum?    |    Eric asked ... Strimmer fuel line?    |    Frank asked ... Working fine. No cold air?    |    c.m.brown asked ... Replace chuck on aeg power drill sb2e 700r?    |    Click here to ask your question

center stand?

i have a puegot speedfighter the center stand has broke leaving a bolt that has got stuck in is this a big job and any ideas what i would pay too have this fixed
chaddy, January 2010
as far as i can remember the speedfight has a stand held on by 3 or four 13mm hex headed 8x1.25mm thread pitched bolts.now if you have snappped a bolt off it should be snapped of in the stand bracket whcih you can just take off and drill out and re tap to 8mm or drill out to 8.5mm and use a longer bolt and an 8mm nut on the back of it.the stand bracket itself has the captive nuts on it so there is no thread in the crancase and it cant have the bolt snapped in it.

adam bike doctor, January 2010
link Click here to see other fixes for Peugeot Speedfighter.