my 75e14 (4 cyl turbo) has developed a bad oil leak, at first i thought it was the crank shaft oil seal so had it changed - no better. I have now removed the water pump pully and think the oil is comming out from the bottom of the water pump - is this possible. has anyone else had an oil leak in this area, i want to be shore before pulling the water pump out
cheers

dave, January 2010

found it - the air compressor bolts were not 100% tight. oil runs out of the mating face down the lh side of the engine then along the bottom edge of the water pump and comes out ontop of the crank pully.

dave, January 2010