my pull start is broke and ive used a drill to start it but ive now rounded off the nut in the middle and i cant start my bike up. what would i use to get it off and were abouts on the midi moto is the electric start on it
thanks

matt, January 2010

I have a midi moto and there is no brand name on it at all i have looked for frame numbers and engine numbers and come up with nothing so could someone help me in this dept.
Also were do i get parts for it as it requires a throttle cable and pull start mech as the old one has shit its self..

Robert, June 2010

weld a pole r sumfin onto it and then turn it .. u will have to get a new bolt for it tho :L

georgy bayy, April 2010

please could u put one on ebay and how much are you selling it for

matt with midi moto, March 2010

you should have fixed the pull start first of all really,the nut will be on the end of the crankshaft and there are a couple of ways to get it off i would use a special tool made by snap on that removes rounded off nuts but your not going to have a set of these so you can either split the nut by drilling into it avoiding drilling into the crankshaft and then split it with a sharp chisel or you could try knocking a slightly smaller socket onto it but be careful not to bend the end of thr crankshaft or you will get alot of vibration when it goes again.the starter motor will more then likeley be at the front of the engine underneath on this engine its basically a strimmer engine if you want a pull start assembly tell me and ill put one on ebay for you i have a spare one in my garage.

adam bike doctor, January 2010