make sure there is plenty of fluid in tme master cylinder , often i find the easiest way to bleed the clutch is by gravity , remove the cap and loosen the nipple on the clutch slave cylinder and wait for air free fluid , check the rubber boot around the slave cylinder if it shows signs of fluid leakage then the cylinder must be replaced , the best way to bleed via the pedal is as above but using a rubber tube with one end on the nipple and the other in a small bottle with some fluid in it , have an assistant pump the pedal gradually and slowly when there are no more bubbles coming from the tube then you have bled the system succesfully . tighten the nipple recheck fluid level and replace cap job done . good luck .
michael desouza ( mds automotive, May 2006
