mt skyjet 125 broke the throttle cable! after changing it the bike will now not start n wen it does it will only idle n not rev up!! its starting 2 get 2 me now lol!! HELP!!!!!!

Ross...., February 2010

yeh same cable n it moves both the shuttle and the carb lever!! thers defo fuel down 2 the carb. it wont even start let alone rev! oh n ther is defo a spark so cant b the cut off either!! its doin ma nut in now lol!!

ross...., February 2010

PS
If you still have old cable is it the same length?

bb, February 2010

clearly not been fitted properly. Does the cable go into the carb onto a slide or does it fit on the side of the carband move a lever/bar.

When you twist throttle it should move a lever or bar on the side of the carb. Get a mate to check it. You can move this bar with you fingers and rev the bike dirctly from the Carb. Check to see if you can do this. If the lever/bar is not moving then the cable needs adjusting. Maybe at the throttle or the carb end. Did you defo get the right cable?

bb, February 2010