i have a hotpoint ultima dishwasher it has recently stopped working i have checked micro switch and replaced programmer/timer switch there is power going to programmer/timer switch but still the d/w refuses to work i have checked p/t switch by powering it direct from mains and the motor appears to work that drives the p/t switch any other suggestions i would be gratefull

mark from wigan, February 2010

hi regarding the df32 hotpoint ultima that appears dead i have fixed it myself yippppeee !!! appears a feed wire fom mains was at fault maybee blue wire nuetral was brocken maybee because all wires to controls run through the door and ten years of opening and shutting the door had broke the wire so replaced wire and it is working again!!!!

mark from wigan, February 2010