The steam is not being produced at all As though the pump is not working

Lynda, February 2010

My iron is fusing all the switches in the house when I turn it on. Can I fix it or has it died?
Thank you

Sandra, August 2016

Hi my irone steam pipe is broken inside how can I fix

Yasir Maqsood, April 2016

My iron is not sucking water in to the base . Any ideas ?

mrs barry, September 2015

My iron is not working at all. When I switch it on it fuses the all the switches in house. How can I fix this? X

shirley, July 2015

the red warning button to let you know the water needs filling is on continually ,even although it has water in it.

margaret, July 2014

I can't see a plug underneath to unscrew. Mine has same issue, no steam. Pump IS working, I can hear it.

Ellie, May 2014

My drainage plug will not un screw! Can anybody help?

John Wayne, May 2014

cannot turn steam off only by main

carol hicks, September 2013

steam not working in bosch b25 l steam iron

williy dillon, July 2012

Hello to all,

ours has just lost its steam completely and it only gets used once a week.

I have carefully de-calced it several times using recommended products and it sounds like we have had most of the issues listed.

A few days ago, it again started to spurt dirty limescale, etc over clothing being ironed, so I knew it was time to de-scale it again.

I started the usual process...and as I went to turn it on to activate the steam and clean through the steam ports with de-scaler...no steam at all! The heat in the iron works only, so purely a waste of time now...

We have had this iron for over a year and it has generally ironed well... but to be honest, overall we are certainly NOT IMPRESSED!

Sadly, Bosch is not on our list to try next...and NOT just because of the iron.

Ian, Stratford upon Avon, July 2012

If you've not got a leaflet with the iron, or like us, have an old leaflet without the calc-clean bit, you can get a copy of the manual from the bosch website:
http://www.bosch-home.co.uk/customer-service/download-product-manuals.html

The model number is on the base of the applicance

Andy, September 2011

I want to no how to calch clean it i did not get a leaflet with my iron

kim, January 2011

Ours wouldn't work straight out of the box, I screwed the plug out of the underneath and blew into the hole as I thought that there might be an air block and this did the trick.

Andy, September 2010

Not being very helpful to Lynda, but I have the same problem, steam at first and then when hot it stops steaming. Any ideas anyone?

Lizzy, February 2010