katlego asked ... Rev count on my 1982?    |    andrew asked ... "SECURE" on a yellow backround, and I cant ge?    |    Melodie asked ... How do I remove and change the basket? Duratech Identity Gu?    |    Kathy asked ... Samsung ER-4915?    |    Mark asked ... Oven door removal?    |    Click here to ask your question

My indesit washing machine wont go past rinse. ?

My Indesit washing maching stops with a continuous raspy grrr sound during the rinse cycle, the conditioner hasn't been used and then the knob clicks round continuously. I know how to reset and start the cycle again, or start where it left off.
I took the top off to see where the sound was coming from thinking it might be the solenoid that lets water in for the conditioner and it worked perfectly, put it back together with clothes in and it failed again. the water pumps out ok. Any ideas??
Hartley, February 2010
Thanks DOMSAT313, I found 2 20p, 2 5p and 1 10p piece in there, also one small pipe, like a breather pipe, was completely blocked by what I can only describe as clay.
It worked great after I cleaned this lot out and remembered to re-connect the power cable after I'd re-connected everything and loaded it with clothes and set it going. It started 'clicking' again and I then had to tip it on its side again to connect the power lead - great fun! but at least it works now.

Hartley, February 2010
check the the drain water pump maybe theres a things block or stop the pumping mechanism

DOMSAT313, February 2010
link Click here to see other fixes for Indesit.