Lou asked ... Mac Allister 35cm electric lawn mower?    |    Ronald Charlwood asked ... Beko fridge/freezer not cold enough?    |    John Broadbent asked ... Advise?    |    suzy asked ... Brother kh-940 not in sync with DAK9 in interactive knitting?    |    Susan asked ... How can I stop my steam iron spraying water with the steam?    |    Click here to ask your question

wiper motor Daf 45 160 uro2 (2000 model)?

How do you access the wiper motor to remove/refit
thanks
richard, February 2010
Its not a nice job, you have to remove the panel in front of the pasenger seat by removing the 7 screws in the top and the 2 6mm bolts in the bottom. Remove the ash tray and disconnect the ciggerette lighter wires, pull out the panel and disconnect blower pipes.

You will then see the wiper motor to the left hand side of the steering wheel. Its bolted to a steel bracket from the front, so you have to remove the steel bracket with the wiper motor attached. The top 2 screws are really arkward, move the wires in front of the bracket and through 2 holes you need to remove the top 2 screws, the bottom 2 screws arn't too bad.

Alex, February 2010
link Click here to see other fixes for DAF DAF 45.