Lou asked ... Mac Allister 35cm electric lawn mower?    |    Ronald Charlwood asked ... Beko fridge/freezer not cold enough?    |    John Broadbent asked ... Advise?    |    suzy asked ... Brother kh-940 not in sync with DAK9 in interactive knitting?    |    Susan asked ... How can I stop my steam iron spraying water with the steam?    |    Click here to ask your question

Replacing door bracket on hotpoint wm62?

HI Anyone know which panel i can remove to get the bracket onto the back of the door hinge assembly?
It looks like the front panel but the drum and seal are attached.
any help welcomed
jon, April 2006
hi there have done this before. All you have to do is open the door and put your fingers on the inside of the rubber, and you should feel a mettal plate hold that with finger while undoing the 2 screws. You will now find that the door comes off in your hand. Put the new hinge over the holes (still holding the other plate behind the rubber) and put the screws back in the holes. Screw tight. (you can buy a new hinge for £10 from your local cooker/ washing machine shop). Take the door off the old hinge and then screw on to new one. hope this helps.

bill, April 2006
link Click here to see other fixes for Hotpoint WM62.