Our Vulcan dishlex 500 Eco won't start. Lights on membrane switch are all off. When pressed (e.g. normal wash and Eco option) they light up. When 'start' is pressed the machine begins but then abruptly halts and all lights go off. I have previously had the membrane replaced by a serviceman several (10?) years ago. I also replaced the main PCB controller with a reconditioned board some years ago as well. Is the fault just the membrane again?

Tony, February 2010

could be dirtycontacts in the safety cut out switch, spray lightly with good quality penetrating/points cleaning fluid.

bob, September 2011