Jon asked ... How do I remove the flywheel. Mountfield 1640h ride on mower?    |    Keith Mumby asked ... Fordson starter solenoid?    |    Suzanne asked ... Washing programme stops after 3 minutes?    |    Rif asked ... Kenwood Dishwasher KID60S20 leaking from front?    |    Fraser asked ... Spares for power craft ppcs 38cc?    |    Click here to ask your question

How can I fix my Briggs & Stratton 12 HP Syncro-balanced Model 281707?

This mower has not been used in several years. We are trying to get it working again. The battery is dead and before we replace it, we were going to try to pull-start the engine. You can't pull the cord as it appears to be "frozen." Any suggestions?
Coleman Riley, February 2010
http://www.briggsandstratton.com/images/bsshop/100/100_repairmanualnew250.jpg

Big Will, June 2010
if the engine is frozen try removing the plugs squirt some oil in the plug holes then take a wrench and on the bottom of the shaft try to move the crank just back and forth at first till it starts to move then try to get some full turns. pistons will freeze up from nonuse.

Mark, March 2010
link Click here to see other fixes for Briggs & Stratton.