i have power on the machine but the digital display is not lighting up . i was wondering which board is more lightly to be gone the main board inside the machine or the board in the front display panel . can anybody help please
cleaned pcb still no joy pcb boards are so expensive dont want to buy wrong one . is there anything else that could cause me to lose the display .is there any internal fuses or overloads inside the machine ?
michael monahan, February 2010
This could be either of the boards or even both if you are unlucky!.also check the blue loom that goes from the pcb to the display as a bad connection here will cause issue.normally you have to remove the display pcb from the fascia panel and clean the pcb tracks as this is usually where the bad connection is
