3 hours ago Karen asked ... Royal 480nt cash register?    |    andrew smith asked ... 2009 fiesta 1388 cc titainum?    |    Eric asked ... Strimmer fuel line?    |    Frank asked ... Working fine. No cold air?    |    c.m.brown asked ... Replace chuck on aeg power drill sb2e 700r?    |    Click here to ask your question

washing machine overflowing?

we have been having floods from our washing machine. It has become appearant it is overfilling and running over the top of the tub. It does not seem to be happening every time the machine is run but seems to be increasing in frequency. This leads me to believe it is some type of float switch which controls the water level that has gone bad, or perhaps gotten stuck or something. If this is the case where would such a device be located on the machine and how difficult would it be to obtain and install a replacement? This is a Roper brand medium sized machine with 2 load size selections, small & large, and has 4 cycles & 2 speeds.
Tom Green, April 2006
problem in more than likely gundged up pressure system pipes,residual soap builds up over time a little like artueries. it reduce pressure signal to control switch.

try good quality de-scaler to see if it will clear hoses

or check hoses for blockages

REMEMBER TO DIS-CONNECT FROM POWER SOCKET FIRST

graham, April 2006
link Click here to see other fixes for Roper.