Pam asked ... Do I need to open the housing to dry the motor?    |    James asked ... Remove enterprise enrolment from an Asus Chromebook C523N?    |    tom schwartz asked ... Bosch maxx 6?    |    Noman asked ... Reverse light switch?    |    Suzie asked ... Stuck Feed dog?    |    Click here to ask your question

How can i fix my Piaggio xevo 400 immobiliser?

Bike stored for winter without batery,put battery back in and it wont start,when i turn the key the imobiliser light goes off then flashes twice before staying on permanately,engine turns but wont start
amj 900, March 2010
im going to tell you how to recode you immobilizer system- charge your battery, now this has to be done very very quick, master key in turn ignition on count 2 seconds quickly, take out , same for normal key, and then the same for the master key again, if you dont do it quick enough it WONT work!! DONT leave your keys next to anything magnetic!!!!!!!!!!!!!!

m, March 2010
try starting it with the master key. This will work or should. You may have to reset it and his is where your friendly piaggio dealer. There is a way you can reset it but you will have to ask Piaggio.
Hope you start it ok

bb, March 2010
Yes i have the master key but what do i do ?

amj900, March 2010
Have you got the original master key?
Cant really do much without it I am afriad. This is a case for trickle chargers everywhere. Over winter invest in a trickle charger.
Your bike CDI thinks that someone is trying to nick it and so the CDI is stopping the Spark getting to the bike.
You will need master key or new CDI alas. A piaggio garage MAY be able to decode but I doubt it. Get a non standard one dont bother with a Piaggio one these are expensive.

bb, March 2010
link Click here to see other fixes for Piaggio.