Hi, I have a n 806 and due to a new battery, I lost the radio/cd etc... I have the security code, but I can't seem to figure out how to enter a code which has an 8 and 0 in it, when the numeric buttons only go up to 6? I've tried repeatedly pressing the digits, I've tried all the arrow buttons, I've almost tried everything but to no avail..... I hope someone can help with this, as I've been without my cd for months now

Tru, March 2010

hi it mite be steering control only some have philips radio in them.
Turn on the radio and the display will show 'CODE'
Use the steering controls for code entry.
Press the [ ¬] button then rotate the thumb wheel for the correct first digit
Press the [ ¬] button then rotate the thumb wheel for the correct second digit
Press the [ ¬] button then rotate the thumb wheel for the correct third digit
Press the [ ¬] button then rotate the thumb wheel for the correct fourth digit
If the correct code is now shown on screen,
press and hold the [ ¬] button for up to 10 seconds to store the code

hay88, March 2010

hi is it a blaupunkt make radio if so here you go
BASIC INSTRUCTIONS TO ENTER A BLAUPUNKT RADIO CODE
Switch the ignition key ON

Press and hold AS button * and the ON button at the same time

Display Shows SAFE then goes to 10 - - - - with a "Beep" from the speaker

Press Preset Button " 1 "repeatedly until the 1st Digit of your Code is displayed
Press Preset Button " 2" repeatedly until the 2nd Digit of your Code is displayed
Press Preset Button " 3" repeatedly until the 3rd Digit of your code is displayed
Press Preset Button " 4" repeatedly until the 4th Digit of your code is displayed

If the display now shows the correct Code number then

Press Button AS and hold to Enter and if successful there should be a "Beep" from the speaker and the radio should switch on

hay88, March 2010