pete asked ... Flymo 330 turboglide?    |    keith asked ... Fuseboard( s) location of renault trafic t1100 1993?    |    Janet asked ... Neff B1641 door not closing at top?    |    Steve asked ... Gilera runner 180 vxr 2001 ignition replacement?    |    Janboy68 asked ... How can I mend my KitchenAid Artisan toaster?    |    Click here to ask your question

34cc 4cycle will not turn over?

This multipurpose tool worked well until last fall. It would not turn over when the pull start was attempted. I removed the factory installed spark plug and then returned the plug and the motor worked fine. It now will not turn over again. I remove the plug and pull and the motor turns over. I return the same plug and it binds or won't turn over. Is there a solution or diagnosis.
Bill, March 2010
If this machine has oil in the sump ( 4 stroke ) it has been tipped and now you have oil above the piston causeing a hydraulic effect, drain oil, remove plug and crank engine until there is no more oil coming from the top of the engine, re fill sump and try again.

Husqvarna man, March 2010