When my machine goes to spin throughout its cycle the drum makes a loud knocking sound. I have investigated the problem and thought it was possibly the belt not being seated correctly, re adjusted and tested, sounded ok, put a full load in the drum and as soon as initial kick start to drum, knocking was heard.
I suspect the pistons that stabilize the drum, but also considering the bearings.
Need to know if either or can be fixed easily and cost effective. WD64 is 8 years old but is in good condotion.

David Burrows, March 2010

one or more of the legs on the drum support has snapped remove drum and replace

robert emmet, March 2010