Lou asked ... Mac Allister 35cm electric lawn mower?    |    Ronald Charlwood asked ... Beko fridge/freezer not cold enough?    |    John Broadbent asked ... Advise?    |    suzy asked ... Brother kh-940 not in sync with DAK9 in interactive knitting?    |    Susan asked ... How can I stop my steam iron spraying water with the steam?    |    Click here to ask your question

Scantronic 9800 Bell Duration?

I key in timimg function 42 and then 1, to get a 1.5 minutes duration but it keeps on beyond 20 minutes,
Have tried a full re program (removing and replacing the NVM) without sucess
Williambodger, March 2010
The battery does not go flat as it is floating on the 230v mains. Yes the bell duration is how long it rings following an alarm condition. Its ok for it to ring until manual reset if you are in the house but not suitable if you are away from home.

Williambodger, April 2010
I forgot, if there is not a 'timer' in the Bell box it will ring until the battery goes flat.

acorn, March 2010
Bell duration, the time the bell rings following an alarm condition, NOT how long it will ring for if all the power is removed.

acorn, March 2010
link Click here to see other fixes for Scantronic 9800.