John asked ... Scantronix 9450 box stuck shut?    |    Pekaye asked ... Clutch Cable change?    |    Richard asked ... Mountfield SP414 mower, revs too high?    |    Don asked ... Find the charger or how to convert the battery?    |    Tanzania asked ... How can i mend my sanyo fwbp505f q?    |    Click here to ask your question

Mot failure on emissions HELP!!?

Hi happy Easter! I have a renault clio mk1 phase 2, 1.2 on a 1997 R reg. It failed on emissisions as follows.
Fast Idle Fail
CO actual 0.63% Fail
HC actual 108 ppm vol Pass
Lambda actual 1.052 Fail

Second Fast Idle Fail
CO actual 0.71 % vol Fail
HC actual 99 ppm vol Pass
Lambda actual 1.030 Fail

Natural Idle Pass
CO .50% vol

The Limits were
CO < 0.30 %vol
HC < 200 ppm vol
Lambda 0.970 - 1.030

The exhaust system is 6 months old including the cat. I don't drive too fast in low gears but I do short journeys. I had the car running for about half an hour on the motorway before going for the test. Any answers would be appreciated. Cheers Simon
simonp, April 2010
Seal up your exhaust system. Dont let any air get in. this can cause it to fail Lamda.

Mick, November 2014
go to your nearest car accesory shop and ask for a bottle of cataclean and follow instructions before retest and will pass

peesian, April 2010
link Click here to see other fixes for Renault Clio mk1 phase 2 1.2.