andrew smith asked ... 2009 fiesta 1388 cc titainum?    |    Eric asked ... Strimmer fuel line?    |    Frank asked ... Working fine. No cold air?    |    c.m.brown asked ... Replace chuck on aeg power drill sb2e 700r?    |    tom dimmock asked ... How can i mend the lid on russell hobbs elec?    |    Click here to ask your question

whale elite tap spout replacement?

any one know how to replace spout on elite tap got spout but dont know how to take tap apart any help appreciated
brenda, April 2010
use a pin on the lower side of the Hot/Cold button on the top of the tap and unscrew the screw to remove the tap control, then gently lift the spout maybe rotating slightly as you pull. (it has an "O" ring that maybe a little dry making it hard to remove. Smear a little vaseline on "O" ring when replacing with new spout)

Hippytitimus, April 2010
Underneath the mounting plate there is a large (17mm?) nut. Unscrew this and the spout will then pull out. But when unscrewing the nut, make sure the collar immediately above the mounting plate is held, otherwise it just keeps going round.

Chas., April 2010
link Click here to see other fixes for Whale Elite.