Machine will not dispense conditioner, is it the solenoid on the water inlet?, there appear to be three.

Kris Brown, May 2006

Thanks You were right about the ducts.Kris

Kris Brown, July 2006

I had the same problem and cured it completely I thought it was the solenoids, but it is simply the small passages in the top of the dispensing tray that get clogged up with gunk. I removed the tray and took it apart carfully, there are some cleverly moulded flaps to open, a bit of a puzzle but worth the effort. I then cleaned out the channels with a feather.. yes a long pheasants tail feather, it works a treat.
Good luck it takes about 15 minutes.

Tim, June 2006

Turns out to be mould in the jets over the dispencer tray.

Kris@popbrowns.co.uk, May 2006