1 hour ago Stuart G asked ... C3 Front Wiper control problem?    |    4 hours ago Clare S asked ... Repair Electriq dehumidifier?    |    Bob asked ... Charger fault?    |    Terry nelson asked ... How to remove the flexible shaft from a curved shaft ryobi t?    |    Matt Longmore asked ... Non-start on Flymo XLT 250?    |    Click here to ask your question

Stihl Chainsaw MS210?

Why is there fuel in the muffler and spark plug compartment?
Al, April 2010
my easy start pull just clicks when pulled. the pawls have been replaced but no solution

brian c, December 2013
Seems that the chainsaw has flooded. leave the chainsaw for a while. then start it (try without choke first) if it floods and cuts out your chainsaw again. check your spark plug is working. if it is then take the carb off. if u unscrew the faces of the carb. you should see what looks like a see-saw with a spring and needle . take the needle out and look that it hasnt been stuck open by any dirt. if it is then it will keep over fueling. if you have an air line try blowing air through that hole also to make sure it hasnt got dirt in thier.also their is 2 butter flys on the carb. (1 for choke and 1 for the throttle.) make sure they are also working.

Jamie, April 2010