Indesit D41 dishwasher.
Today the door failed to close properly.
I'm assuming it is something to do with the catch inside the door itself. I never really paid much attention to it before so I don't know how the thing operates.
Does anyone have a manual that gives an exploded diagram or can point me in the right direction to fix it ? Can I take the door apart ?
thanks

Alan Henderson, May 2006

have the same problem
there are 6 screws located to the top end and side to the door remove these and also the 2 screws holding the door catch.
the front panel will push out, there you will see 2 wires attached to a micro switch remove the 2 screws holding the doorcatch turn upside down and push the lever back with your thumb, it all takes about 5 mins including dismantling and putting it all back,I am trying to locate a new microswitch as I think this is the cause of the problem remember to unplug the dishwasher from the electricity supply first

colin richards, June 2006

have the same problem
there are 6 screws located to the top end and side to the door remove these and also the 2 screws holding the door catch.
the front panel will push out, there you will see 2 wires attached to a micro switch use a flat head screwdriver to prise the lever back
am trying to locate a new microswitch as I think this is the cause of the problem remember to unplug the dishwasher from the electricity supply first

colin richards, June 2006