Andrew - C asked ... Stannah 400?    |    Liam asked ... Belts for old WEBB Mower?    |    Leith asked ... Bosch Classix Type WKM41 front loader washing machine?    |    Pam asked ... Do I need to open the housing to dry the motor?    |    James asked ... Remove enterprise enrolment from an Asus Chromebook C523N?    |    Click here to ask your question

singer 1425 sewing machine?

switches on but when you press the foot pedal it won't rotate etc
shamali, April 2010
Hi, can you turn the machine over by hand? If not the machine needs a service or has a thread jam or the hook gear is broken.
When you press the pedal can you hear the motor running? If so, either the belt has snapped or is mega loose (can be adjusted by an eccentic screw at the bottom of the motor)
Does the light come on? if not it may be a fuse blown or a dodgy connection in the plugor a broken wire in the lead.
If the light comes on could be a broken wire on the foot controller side of the lead.

Robert of Liverpool, May 2010
Make sure there is power to the machine, check the light on the machine, if no light check the fuse in the plug, check the cable for any cuts or breaks.

drivewithken, April 2010
link Click here to see other fixes for Singer.