it fills up the empties and reads E30. can you please help me?

Varun Verma, May 2006

I have a Zanussi ZWG1140M that developed the E30 alarm and would not work. This means the door is not closed and locked. The problem was that the door was locked, so there was a prolem with thfeedback to the control. I checked the lock, and the switch gave a closed contact feed when the lock was operated. I then checked the orange feed wire to tge pcb, it was not damaged/broken. Then I checked d the pcb. There
was a corroded track. I soldered on a link wire to bridge the damaged area and it now works, error code gone, machine working cost is zero.

Martin Hook, September 2017

Mine had the same, I opened it up at the front right (was a bit hard to actually open it), i turned the switch and loads of dirty water came out (prepare yourself with loads of towels cuz the water keeps pooring out and its hard to make it go into a cup) , after that i set it on 'centrifugeren' (dunno what it is in english) wich takes about 9 minutes, and after that it worked fine.

Bie, May 2011

Fluff filter needs de fluffing. My Zanussi washer dryer WJS1465 W had been dislaying E30 for some time and became more frequent. I'd try to find the filter (mine was on the front, but did surprise me that about 4 litres of water poured out when i opened it) and that did it for me. Now works like new.

adam, November 2007

Usualy a block of your filter

Jeff Evans, June 2007

Did you ever get an anwser? My Zanussi ZWF 1430S does exactly the same thing and I also get an e30 error code displayed!

ta

Paul

Paul C, December 2006