I have an ignition fault on my Ford fiesta 1.25 Zetec. The car will turn over but wont fire up.I have checked the spark plugs for a spark and nothing. I have changed the coil pack and crank shaft sensor still nothing. I have changed the rest of the sensors that I can find but still No spark. I`ve checked all the fuses and they seem fine. If anyone has had a similar problem and can help in any way please let me know what the solution is to my car. Many thanks

Graham, May 2010

cheapest option is off to the scrapyard and grab a complete distributor and any other ignition parts you can get and pay a few quid for them and it should be possible to sort it. If you have a fresh coil pack and all the sensors, does it have an ignition module of some kind? a black box which amplifies the spark? Some systems use this and its inside the car under the dash. I would look on the net for an exploded diagram of the ignition system of this car also

Mike, May 2010

Thanks for your advice Nigel. I have replaced all the relays today. I still have NO spark from this car. If you have any other advice please let me know. Thankyou Graham

Graham, May 2010

Main engine control relay, in the fusebox in the engine bay

nigel, May 2010