andrew smith asked ... 2009 fiesta 1388 cc titainum?    |    Eric asked ... Strimmer fuel line?    |    Frank asked ... Working fine. No cold air?    |    c.m.brown asked ... Replace chuck on aeg power drill sb2e 700r?    |    tom dimmock asked ... How can i mend the lid on russell hobbs elec?    |    Click here to ask your question

How do I remove the Hot Water Valve from my F & P washing machine?

How do I remove the hot water valve? I have taken off the cover, and have removed the hoses from the back. Just can't figure out how to get the valve off/out? GW609AU top loader.
leigh, May 2010
Remove 2 screws holding the retainer in place then one large screw holding the water chamber down onto the deck. Pull water chamber & both valves up & out. Replace the valve & refit chamber etc. Don't forget to swap the rubber seal off the old valve over to the new valve otherwise it will leak & fill your control PCB with water.

Lincoln Appliance NZ, May 2010
link Click here to see other fixes for Fisher & Paykel GW609AU.