1 hour ago Paul Dennis Newman asked ... Gardenline GLS 36K scarifier?    |    Cam Tait asked ... How can I fix my Bison 50 stair lift?    |    GG asked ... Fix food processor motor?    |    T asked ... How do I turn the delay off on Electrolux DX302 dishwasher?    |    Helen asked ... How can I mend my Kenwood Gourmet FP505?    |    Click here to ask your question

Hotpoint Aquarius Condenser Drier - TCM570?

Keeps on tripping out the electricity. Any ideas what the issue is and what to replace? Thanks
RJhol, May 2010
the tumble dryer timer gets stuck so doesent cut out

gary, December 2015
How do you replace a belt on a TCM 570 hotpoint condenser tumble dryer

Billy, May 2014
Ive changed the heating element and thermostats and still no hot air :-(

rob, November 2013
My TC570 condenser dryer cuts out the electric. I've cleaned the filters & dried out pump area . It's filling up with water & tripping again please can you help

Tom, March 2013
Thankyou so much. Throwing it on the floor seemed extreme but after about 8 times it worked. So much money saved!
regards Jackie

happy mummy and daddy, February 2013
how do you put the 2 brown wires and the 2 blue back on

bryan, December 2012
Be careful no coins get trapped in the condenser unit as this can cause the dryer to trip the mains. The pump unit has a polystyrene float that trips the machine should the pump fill with water. If the water in this unit is dried out, it might solve the problem.

Steve, October 2012
My drier is making a racket when switched on,I have cleaned out filters,switched it of and on at the mains,can u help its so noisey

Gill, October 2012
how to replace the heater element

justin butcher, August 2012
Hi,
My condenser Tumble dryer keeps on tripping my electric's in the house. I have put a new fuse in and tried it another plug but again it tripped my electric's.
Please help me.
Thanks

Shona, August 2012
Opened back of hotpoint tcm570p. Sorry I did, As the element( I think) came apart, very very flimsy.
Any Ideas or just throw it out. Initial problem was belt broken. Now this looks a lot more serious

Hotpoint Destroyer, May 2011
HI. We have Hotpoint Condenser Dryer that also tripped electric when plugged in and start button pressed. We were advised by Hotpint to pay service fee of £105.00 and engineer will call. Instead we found this fantastic site and followed some pointers left by others in similar situation. We first removed back plate with heating element and used hairdryer to dry any damp patches and slightly damp clothto wipe away any excess dust on metal plate. We also give condenser unit from front of appliance a good clean out. Also water had got into pump unit at back so made sure that was dry also. Took abit of time and being careful as to put everything bak in original position and IT WORKED !!!!!!! Yippee !!! Thanks alot HOWTOMENDIT.com and all followers. Saved us alot of cash & so near to Xmas !!!!

Darren & Kelly Taylor, October 2010
link Click here to see other fixes for Hotpoint.